Calcium Reactor Phosphate Contribution Calculator
This calculator estimates the amount of phosphate that a calcium reactor contributes to an aquarium system. It should not be used immediately after setting up or adjusting a calcium reactor. Instead, wait until the system phosphate level has stabilized.
Note that the term "effluent" describes the water leaving the reactor. The best way to measure the effluent flow rate is with a small beaker of known volume and a stop watch.
Effluent Phosphate Level:
ppm
mg/L
Effluent Flow Rate:
U.S. Gallons
Liters/Litres
Milliliters (ml)
Cubic Centimeters
Cubic Inches
Cubic Feet
Cubic Meters
Level Teaspoons
Level Tablespoons
Level U.S. Cups
Level Metric Cups
Per:
Second
Minute
Hour
Day
Week
30-Day Month
365-Day Year
System Phosphate Level:
ppm
mg/L
System Volume:
U.S. Gallons
Liters/Litres
Milliliters (ml)
Cubic Centimeters
Cubic Inches
Cubic Feet
Cubic Meters
Level Teaspoons
Level Tablespoons
Level U.S. Cups
Level Metric Cups
System Salinity:
Parts-Per-Thousand (ppt)
Relative Specific Gravity (sg)
Conductivity (mS/cm)
System Temperature:
Fahrenheit
Celsius/Centigrade
Kelvin
Phosphate Contribution:
ppm
mg/L
Per:
Seconds
Minutes
Hours
Days
Weeks
Months (30-Day)
Years (365-Day)